Ditching wet or dry makes no difference to the new AMCO Ditchers.  The Model AD-5 is designed for 50 to 110 PTO horsepower tractors, and the Model AD-10 or AD-20 for up to 150 PTO horsepower tractors.  Both models are designed for use with quick coupler.

You can dig ditches with single or multiple passes with the AMCO Ditchers, thanks to AMCO's adjustable skid.

Standard parking stands hold your AMCO Ditcher erect for ease in disconnecting and connecting to your tractor, and a chain support keeps the PTO shaft properly positioned for easy connection.

All models of the AMCO Ditcher feature cutter head blades of replaceable, heat-treated, high-carbon special abrasive resistant steel; four triple-lip, sealed ball bearings; and a universal drive shaft, telescoping and fully shielded.

The chain drive is heavy-duty, endless double #80 roller chain with one inch pitch.  The chain runs continuously in a sealed oil bath, and sprockets are case hardened on both models.  The new AMCO Ditcher has an adjustable idler sprocket.

Compare for yourself, from coupler to cutter head.  AMCO makes a better ditcher.

Cutter head blades are replaceable, heat-treated, high-carbon special abrasive resistant steel.

AMCO's universal drive shaft is telescoping, fully shielded and constantly supported for easy one-man hookup.

AMCO Power Ditchers all feature an adjustable skid.

Standard parking stands keep your Power Ditcher erect and makes easy the disconnect and connecting to your tractor 3 point lift.

MODEL AD - 5-18 (540 PTO)

MODEL AD - 10-18 (1000 PTO)

MODEL AD - 20-18 (1000 PTO)

"A"Frame

Cutter Head

Chain Drive with Adjustable Idler Sprocket                  

Shear Bolt

Chain Drive Housing            

Universal Drive Shaft

Designed for use on tractors with 540 RPM PTO from 50 to 110 PTO horsepower

Category II and III 3 point hitch or quick coupler

Adjustable 18" to 20"  Four replaceable, heat-treated, high-carbon special abrasive resistant steel blades Rotates at 740 RPM

Heavy-duty, endless double #80 roller chain.  Shafts are 2-3/16" diameter high-carbon steel.     Top sprockets with 22 teeth and bottom     sprockets with 16 teeth, are case hardened.

7/16" diameter, grade 2

6" x 10" x 1/4" tubing welded into rigid, one piece, all-welded main frame

1-3/8" - 6 Spline. Quick coupler connects to 540 RPM tractor PTO shaft.  Shaft is telescoping and fully shielded.

Designed for use on tractors with 1000 RPM PTO from 80 to 150 PTO horsepower

Category II and III 3 point hitch or quick coupler

Adjustable 18" to 20"  Four replaceable, heat-treaded, high-carbon special abrasive  resistant steel blades Rotates at 740 RPM

Heavy-duty, endless double #80 roller chain.  Shafts are 2-3/16" diameter high-carbon steel.   Top sprockets with 22 teeth and bottom sprockets with 16 teeth, are case hardened.

7/16" diameter, grade 2

6" x 10" x 1/4" tubing welded into rigid, one piece, all-welded main frame

1-3/8" - 21 Spline (AD-10) or 1-3/4" -21 Spline (AD-20). Quick coupler connects to 1000 RPM tractor PTO shaft.  Shaft is telescoping and fully shielded.