Planting, Fertilizing & Inter-Row Cultivation > Dry And Liquid Fertilizer Application
Built Solid
The Yetter standard rear and side-profile knives and injection nozzles use corrosion-resistant stainless-steel fertilizer tubing. Each knife is hardened to minimize wear. You’ll find sturdy components throughout which make Yetter Fertilizer Coulters ideal for ridge-till, mulch-till and no-till practices.

Narrow Design
A heavy duty downpressure spring and narrow coulter deliver ideal soil penetration and accurate fertilizer placement directly alongside the seed. Our exclusive narrow design minimizes soil disturbance and doesn’t leave behind any wide fertilizer double disc opener trenches.

Fully Adjustable

You want your fertilizer coulters to last for years! With the Yetter fully-adjustable system, the standard rear knife can be adjusted horizontally up against the coulter as the blade wears, preventing build-up of residue between the knife and the coulter. This helps the coulter slice through residue and soil, reducing excess wear on the knife.

Fertilizer Coulters- 2995 Injection System

The Yetter 2995 with Injection System features the rubber mounted tine injection nozzle for dependable liquid or dry fertilizer application. It's effective in all tillage types and fits most Yetter fertilizer coulters. Tips are required.


Fertilizer Coulters- 2995 With Side Profile Knife
2995 The Yetter 2995 with Austempered Side Profile Knife gives you effective placement of liquid or dry fertilizer with minimal adjustment. This unit works well in no-till and minimum tillage applications.




Fertilizer Coulters- 2995 With Cad Rear Knife



The Yetter 2995 with wear resistant CAD Tip Standard Rear Knife provides optimum placement of liquid, dry or suspension fertilizer. This is the ideal system for no-till fertilizer placement.
Fertilizer Coulters- 2995 With 20" Blade
2996 The Yetter 2996 with CAD Tip Knife
provides all the standard features of our 2995 Series but with a larger 20" blade for even deeper placement of liquid or dry fertilizer for use with toolbars, commonly referred to as deep root banding. Also available for injection.

Fertilizer Coulters- 2995 With Rear Knife


When soil contour is minimal and placement is not as crucial, the Yetter 2990 Series with Standard Rear Knife offers a cost-effective application of liquid, dry or suspension fertilizer. It works well in all practices but is best in no-till.


Fertilizer Coulters- Double Hub Coulter



 

Double Hub Coulter works in even the toughest conditions and features the rubber mounted tine injection nozzle for sufficient placement of liquid fertilizer. It shines in all tillage types. Tips are required.


Fertilizer Coulters - 2996 With 4 Degree Angle

2996

The Yetter 4 degree angle fertilizer coulter uses the square shank to change the blade angle by 4 degrees. This widens the fertilizer trench and pushes residue aside, reducing hairpinning and plugging between the knife and blade.
Fertilizer Wheel Injection System - 2968

2968

Adding precision fertilizer placement to your Yetter 2960/2967 Residue Manager Combination lowers your input costs with one-pass seeding and feeding! The 2968 Series Fertilizer Wheel Injection System uses a 10” notched wheel followed by an adjustable stainless steel injector tube. In one pass you get a cleared row for faster warm up, loosened soil ahead of your planter double disc openers and fertilizer placement right beside the row.

In the area cleared by a residue manager, they work just as well or better than standard frame-mounted fertilizer coulters under the same conditions.

Fertilizer application with the 6000 cultivator

Liquid Fertilizer Tubes NH3 Coil Shanks Double Disk Closers
"T" shaped liquid fertilizer tubes place nutrients on each side of the row for better plant uptake.
NH3 Coil shanks for preplant or side-dress application.
Double disc closers help to seal NH3 in heavy residue conditions.

Ensure Accurate Anhydrous Ammonia Application With a

Hiniker 8150 control system

Anhydrous ammonia is one of the most efficient and widely used sources of nitrogen for crop production. However, varying ground speed, fluctuating temperatures, and vapor generated in the delivery system can cause wide variations in application rates. These variations cost money, either by reducing yields or by increasing fertilizer expense.

Click to go to the Hiniker Electronics Page
The Hiniker 8150 Anhydrous Ammonia Control Systems ensures accurate application by measuring and controlling NH3 in its liquid state. Ground speed and flow rate are constantly measured and relayed to the control console. The Hiniker 8150 Control Console uses this information to control application rates via a stainless steel servo valve, eliminating the inaccuracies common in NH3 application.

Piston Metering Pumps
Designed for Today's Chemicals and Fertilizers!
Total Dependability and Versatility!

LM-1255 Series

LM-1255 Series
LM-1255 Series

Single Piston, Double Acting

Stroke - Variable

Rated Flow - 12.5 GPM

Rated Pressure - 120 PSI

Rated Speed - 550 RPM

Inlet - 1"

Outlet - 1"

Clutch - No Clutch

Rated Flow Based on
12 lb. per gallon Fertilizer

Models available:
LM-1255 Without Clutch

LM-2450 Series

LM-2450 Series
LM-2450 Series

Single Piston, Double Acting

Stroke - Variable

Rated Flow - 25.7 GPM

Rated Pressure - 120 PSI

Rated Speed - 550 RPM

Inlet - 1-1/2" FPT

Outlet - 1" FPT

Clutch - Various Options

Rated Flow Based on
12 lb. per gallon Fertilizer

Models available:
LM-2450 Rope Control Clutch
LM-2455 Without Clutch
LM-2458 Electric Control Clutch
LM-2459 Hydraulic Control Clutch
Models also available in 316 stainless steel

LM-4450 Series

LM-4450 Series
LM-4450 Series

Single Piston, Double Acting

Stroke - Variable

Rated Flow - 34.2 GPM

Rated Pressure - 120 PSI

Rated Speed - 450 RPM

Inlet - 1-1/2" FPT

Outlet - 1" FPT

Clutch - Various Options

Rated Flow Based on
12 lb. per gallon Fertilizer

Models available:
LM-4450 Rope Control Clutch
LM-4455 Without Clutch
LM-4458 Electric Control Clutch
LM-4459 Hydraulic Control Clutch
Models also available in 316 stainless steel

LM-4950 Series

LM-4950 Series
LM-4950 Series

Double Piston, Double Acting

Stroke - Variable

Rated Flow - 68.4 GPM

Rated Pressure - 120 PSI

Rated Speed - 450 RPM

Inlet - 2" FPT

Outlet - 1-1/2" FPT

Clutch - Various Options

Rated Flow Based on
12 lb. per gallon Fertilizer

Models available:
LM-4950 Rope Control Clutch
LM-4955-ECC Electric Control Clutch
LM-4955 Without Clutch
LM-4959 Hydraulic Control Clutch
Models also available in 316 stainless steel

L-4600 Series

L-4600 Series
L-4600 Series

Double Piston, Double Acting

Stroke - Variable

Rated Flow - 24.8 GPM

Rated Pressure - 120 PSI

Rated Speed - 550 RPM

Inlet - 1-1/4" FPT

Outlet - 1-1/4" FPT

Clutch - Various Options

Rated Flow Based on Water

Models available:
L-4600 Rope Control Clutch
L-4605 Without Clutch
L-4610 Hydraulic Control Clutch

L-4400 Series

L-4400 Series
L-4400 Series

Single Piston, Double Acting

Stroke - Variable

Rated Flow - 26.6 GPM

Rated Pressure - 120 PSI

Rated Speed - 350 RPM

Inlet - 1-1/2" FPT

Outlet - 3/4" FPT

Clutch - Various Options

Rated Flow Based on Water

Models available:
L-4400 Rope Control Clutch
L-4405 Without Clutch
L-4409 Hydraulic Control Clutch

L-5100 Series

L-5100 Series
L-5100 Series

Double Piston, Double Acting

Stroke - Variable

Rated Flow - 106.9 GPM

Rated Pressure - 120 PSI

Rated Speed - 350 RPM

Inlet - 3" FPT

Outlet - 2" FPT

Rated Flow Based on Water

Model available:
L-5100 Without Clutch
sales@tricoprusa.com Tricorp USA | P.O. Box 2779 | Palm Beach, FL 33480 USA
phone:561-804-9909 | fax:561-804-9042 | email: sales@tricorpusa.com
Copyright © 2001