|
|
Planting,
Fertilizing & Inter-Row Cultivation > Packers
| 3-Section, 20 - 36 ft. |
4400 Series "Flex-Wing"
Packer
Model 4436 shown |
The Krause 4400 Series Flex-Wing Packers offer more time and
money-saving features than any other packers on the market.
Krause packers pulverize clods, press down stones and eliminate
air pockets in the soil, resulting in a superior seedbed to
give your crop an extra edge right from the start.
Krause's innovative use of massive 6 5/8" roller
axles eliminates the need for troublesome middle gang bearings,
and eliminates the "skip" in the tilled
soil due to the space taken by the middle gang bearing. The
6 5/8" diameter roller axles are up to twice as strong
as the 4" diameter axles used on some competitive models.
Transport wheels clear the soil by several inches eliminating
wheel tracks in the seedbed. Front and rear gangs may be set
to overlap, so there are no unworked strips, even when flexing
over hills or terraces.
The 4400 Series Packers are offered in working widths from 20'
to 36' to meet the needs of today's large farming operations.
All Krause Packers feature "cross-fold" design
for convenient road transport.
|
 |
Telescoping Tongue
Models 4428 - 4436 (28' through 36') have an extendable tongue
to enable shorter turns when the unit is being pulled behind
another tillage implement. The telescoping tongue increases
tongue length from 13'4" to 18'4". The tongue
may be retracted for road transport or more convenient storage. |
 |
Super Seal Bearings
Krause "SuperSeal" regreaseable bearings are used
on 4400 gang axles to ensure long life and rugged durability.
Since there are no middle gang bearings, the "SuperSeal"
bearings can be easily removed from the gang for servicing,
without disassembling the gangs, a time and labor saving feature
you'll be sure to appreciate. |
 |
V-Pack Wheels
4400 VP Series Packer feature 22 3/8"
diameter by 1 3/4" wide V-pack wheels on 7 1/4" spacing.
The "V" shaped packer wheels create a "corrugated"
field finish to fight wind erosion in sandy soils. Tie rods
on the VP Series are 1 1/2" diameter alloy and utilize
"Superseal" Bearings. |
4400 Series Flex-Wing Packer Specifications
| Model |
Approx.
Working
Width |
Center
Working
Width |
Wing
Working
Width |
No.
Packer
Wheels |
Approx.
Shipping Wt.,
w/Cast
Wheels |
Approx.
Shipping Wt.
w/Ductile
Wheels |
| 4420 |
*20'-4" |
11'-8" |
4'-4" |
61 |
5665 |
5141 |
| 4422 |
*22'-4" |
11'-8" |
5'-4" |
67 |
5950 |
5374 |
| 4424 |
*24'-4" |
11'-8" |
6'-4" |
73 |
6224 |
5597 |
| 4426 |
*26'-4" |
11'-8" |
7'-4" |
79 |
6509 |
5830 |
| 4428 |
*28'-4" |
11'-8" |
8'-4" |
85 |
7290 |
6559 |
| 4430 |
*30'-4" |
11'-8" |
9'-4" |
91 |
7575 |
6793 |
| 4432 |
*32'-4" |
11'-8" |
10'-4" |
97 |
7921 |
7087 |
| 4434 |
*34'-4" |
11'-8" |
11'-4" |
103 |
8329 |
7444 |
| 4436 |
*36'-4" |
11'-8" |
12'-4" |
109 |
8620 |
7683 |
| 4400
VP SERIES (V-PACK GANGS) |
| 4426VP |
27'2" |
11'-6" |
7'10" |
45 |
5743# |
-- |
| 4428VP |
28'4" |
11'-6" |
8'5" |
47 |
6380# |
-- |
| 4430VP |
30'9" |
11'-6" |
9'-8" |
51 |
6642# |
-- |
| 4432VP |
33'2" |
11'-6" |
10'-11" |
55 |
7031# |
-- |
| 4434VP |
34'5" |
11'-6" |
11'-6" |
57 |
7295# |
-- |
| 4436VP |
36'10" |
11'-6" |
12'-8" |
61 |
7562# |
-- |
Horsepower requirements are approximately 1-2 drawbar
horsepower per foot of rolling width.
*Alternate set-up allows deletion of 2 packer wheels, reducing
working width by 8". |
| Standard Equipment |
| |
|
|
| Hitch: 1 1/4" clevis
type |
| Tongue Jack |
| Notched Rollers: 4"
x 20" cast iron |
| Roller Axles: 6 5/8"
diameter steel pipe |
| Roller Bearings: regreaseable
SuperSeal bearings |
| Wheels: |
|
|
Models 4420-4426;
(2) 15" x 8"
Models 4428-4436;
(4) 15" x 8" |
| Tires: |
|
| |
Models 4420-4426;
(2) 9.5L x 15 8-ply
Models 4428-4436;
(4) 9.5L x 15 8-ply |
| Hitch Leveling: ratchet
jack leveling |
| Telescoping Tongue: |
| |
Models 4428-4436;
13'-4" to 18'-4" |
| |
|
|
|
| Depth Control: 4"
x 16" hydraulic cylinder |
| Wing Lift: |
 |
Models 4420-4430;
(2) 4" x 24" hydraulic cylinders
Models 4432-4436;
(2) 4 1/2" x 24" hydraulic cylinders |
| All Hydraulic Hoses |
| Transport Width: |
| |
Models 4420-4434; 12'-4"
Model 4436; 13'-10" |
| Transport Height: 6'-11"
to 8'-4" |
| Transport Length: 16'-5"
to 23' |
| Road Clearance: 12"
|
| Safety Chain |
| Transport Locks: automatic
on all Models |
|
|
|
