 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 Tank quick fills are located on each side of the control valve panel, for the rinse and solution tanks. Solution tank has a graduated indicator for capacity level. Roll Out ladder and large operator platform allows safe, easy access to all the tanks. |
|
 |
Center spray boom assembly is sturdy, durable and incorporates self leveling suspension to maintain even application across the entire spray boom. This primary assembly is constructed of 2 ½" x 2 ½" tubing. Hydraulic parallel lift allows for wide range of boom height adjustment. |
| Each spray boom wing is equipped with a cushioned breakaway section at the end of the boom. |  |
 |
Spray booms outer wing sections
are hydraulically folded 180 degrees. |
| Front folding spray booms are built for reliability. The wing booms primary construction is of 2"x2" tubing. |  |
 |
Description Multi-Purpose Sprayer, Accurate and Efficient. The Right Way to Spray!
|
| Options |
| TeeJetÒ singles or triple nozzles are available | HyproÒ pumps – PTO or Hydraulic Driven | Air vent for easy priming |
| TeeJetÒ 844 or RavenÒ Controller | Hydraulic Boom Height Adjustment | A-Mark foam markers |
| Electric or Hydraulic Wing Tilt | Hand gun with 18" extension | 50 gallon flush rinse kit |
| Chemical induction package |
| Specifications |
| Frame: | Tank: |
| 4x4" Steel Tubing | 500 U.S. Gallons |
| Clevis Adjustable Height Hitch | Rotational Molded Polyethylene |
| 2 – 12.5 x 15 Tires Adjustable from 60"- 120" | 5-1/2" Deep Sump |
| Rigidly Welded and Constructed | Dual – Jet Agitation |
| 30" Trailer Clearance | Capacity Indicators Molded – In |
| 4 – 9.5L x 15" Tires Adjustable from 64" – 120" (tandem axle) | |
| Pump: | Controls: |
| High Volume HyproÒ HM4 Hydraulic Centrifugal | Three Section Electric Control with Pressure Regulator from Cab |
| Vent Kit Attached | Master ON/OFF Boom Switch |
| Plumbing: | Booms: |
| 50 Mesh Line Strainer | Blumhardt’s Patented 45’ to 62’ Parallel Flotation Booms |
| 1-1/2" Bottom Fill Safety Shut-Off Valve | Lightweight with Dual Breakaways |
| Blumhardt’s Nozzles | |
| Clean Water Safety Rinse Kit |
 DescriptionExcellent for liquid chemical or fertilizer incorporation. The right way to spray! The wagon master is an excellent addition to any farm operation. |
||||||||||||||||||||||||||||||
Options
|
||||||||||||||||||||||||||||||
| Specifications |
| NURSE
TANK UNIT |
SPRAYER UNIT WITHOUT CONTROLS | SPRAYER UNIT WITH CONTROLS | SINGLE-PISTON GROUND DRIVE UNIT |
DOUBLE-PISTON GROUND DRIVE UNIT |
|
| SHIPPING WEIGHT | 1520 lbs. | 2240 lbs. | 2330 lbs. | 2380 lbs. | 2420 lbs. |
| OPERATING WEIGHT | 10,470 lbs. | 11,190 lbs. | 11,290 lbs. | 11,310 lbs. | 11,350 lbs. |
| MAX. SPEED | 20 mph. | 20 mph. | 20 mph. | 20 mph. | 20 mph. |
| TIRES | Four 12.5Lx15 | Four 12.5Lx15 | Four 12.5Lx15 | Four 12.5Lx15 | Four 12.5Lx15 |
| RIMS | Four 10"x15" | Four 10"x15" | Four 10"x15" | Four 10"x15" | Four 10"x15" |
| WHEEL SPACING | 98" to 144" | 98" to 144" | 98" to 144" | 98" to 144" | 98" to 144" |
| AGITATION | Dual-Jet | HM4 | HM4 | HM4 | HM4 |
| PUMP | N/A | HM4 | HM4 | J.Blue L-4409 | J.Blue L-4409 |
| MANIFOLD LINES | N/A | 11/16"
I.D.
x 1" O.D. EVA |
11/16"
I.D.
x 1" O.D. EVA |
11/16"
I.D.
x 1" O.D. EVA |
11/16"
I.D.
x 1" O.D. EVA |
| PLUMBING | N/A | 1-1/2"
Bottom Fill Optional 2" |
1-1/2"
Bottom Fill Optional 2" |
1-1/2"
Bottom Fill Optional 2" |
1-1/2"
Bottom Fill Optional 2" |
| SPRAY CONTROL | N/A | N/A | 2-Section
Electric Remote |
N/A | N/A |
| FLOW CONTROL | N/A | N/A | Servo Valve | N/A | N/A |
| FILTRATION | N/A | 50 Mesh
Line Strainer |
50 Mesh
Line Strainer |
50 Mesh
Line Strainer |
50 Mesh
Line Strainer |
| TANK | 1000 gal. Polyethylene | 1000 gal. Polyethylene | 1000 gal. Polyethylene | 1000 gal. Polyethylene | 1000 gal. Polyethylene |